❏
Owner — Displays the RMON station or user that requested the RMON information.
The field range is 0-20 characters.
❏
Sample No.— Indicates the sample number from which the statistics were taken.
❏
Received Bytes (Octets) — Displays the number of octets received on the interface
since the device was last refreshed. This number includes bad packets and FCS octets,
but excludes framing bits.
❏
Received Packets — Displays the number of packets received on the interface since the
device was last refreshed, including bad packets, Multicast and Broadcast packets.
❏
Broadcast Packets — Displays the number of good Broadcast packets received on the
interface since the device was last refreshed. This number does not include Multicast
packets.
❏
Multicast Packets — Displays the number of good Multicast packets received on the
interface since the device was last refreshed.
❏
CRC Align Errors — Displays the number of CRC and Align errors that have occurred
on the interface since the device was last refreshed.
❏
Undersize Packets — Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
❏
Oversize Packets — Displays the number of oversized packets (over 1518 octets)
received on the interface since the device was last refreshed.
❏
Fragments — Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
❏
Jabbers — Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
❏
Collisions — Displays the number of collisions received on the interface since the
device was last refreshed.
❏
Utilization — Displays the percentage of the interface utilized.
2. Select an entry in the History Entry No. field. The statistics are displayed.
Configuring RMON Events
This section includes the following topics:
■
Defining RMON Events Control
■
Defining RMON Alarms
■
Viewing Event Logs
Defining RMON Events Control
The RMON Events Control page contains fields for defining RMON events.
To view RMON events:
Embedded Web System User Guide
www.hp.com
Viewing Statistics
15-9