Testing The Path From A Pc To The Internet - NETGEAR WPN824N - RangeMax Wireless-N 150 Router Setup Manual

Testing the Path from a PC to the Internet

After verifying that the path between your computer and the wireless router works correctly, test
the path from your PC to the Internet. From the Windows Start > Run... menu, type:
PING -n 10 <IP address>
where <IP address> is the IP address of a remote device such as your ISP's DNS server.
If the path is functioning correctly, replies as in the previous section are displayed. If you do not
receive replies:
• Check that your PC has the IP address of your router listed as the default gateway. If the IP
configuration of your PC is assigned by DHCP, this information is not visible in your PC's
Network Control Panel. Verify that the IP address of the router is listed as the TCP/IP default
gateway.
• Check to see that the network address of your PC (the portion of the IP address specified by
the netmask) is different from the network address of the remote device.
• If your ISP assigned a host name to your PC, enter that host name as the account name in the
Basic Settings screen.
Help with Troubleshooting
RangeMax Wireless-N 150 Router Setup Manual
v1.0, November 2009
26