NETGEAR WPN824N - RangeMax Wireless-N 150 Router Setup Manual page 12

Use the label on the bottom of the wireless router to locate the Internet port, which is to the
e.
left of the Wireless On/Off button on your router.
Locate the Ethernet cable that came with the NETGEAR product. Securely insert that
f.
Ethernet cable into your modem and into the Internet port of the wireless router (3).
Figure 7
g. Locate the cable you removed from the modem in
into a LAN port on the router such as LAN port 1.
Figure 8
Your network cables are connected, and you are ready to start your network.
Start your network in the correct sequence.
2.
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
a. First, plug in and turn on the cable or DSL modem. Wait 2 minutes.
b. Now, plug the power cord into your wireless router and into a power outlet. Wait 1 minute.
Getting to Know Your Wireless Router
RangeMax Wireless-N 150 Router WPN824N Setup Manual
3
4
v1.0, November 2009
Step c. Securely insert that cable (4)
9