Tx Start Speed; Dial Tone Detect - Canon 4205B002 User Manual

The machine has various settings for sending faxes as follows. Change the settings as necessary.
For details, refer to the on-screen manual:
ECM TX
Sends faxes in ECM (Error Correction Mode). When the recipient's fax machine is compatible with
ECM, the machine resends the fax after correcting errors automatically.
Pause time settings
Sets the length of time paused for each press of the Redial/Pause button when entering fax/
telephone number.

TX start speed

Selects the fax sending speed.
Color transmission
When faxing color documents using the ADF, the machine scans documents in black & white and
send them if the recipient's fax machine does not support color faxing.
TX report
Prints a sending report automatically after the machine sends faxes. You can select Do not print,
Print error only, or Print for each TX.

Dial tone detect

Sets the machine to send a fax after checking for the dial tone when operations for outgoing and
incoming calls are required simultaneously, thus preventing incorrect transmission.
Note
This setting may not be available depending on the country or region of purchase.
Check RX FAX information
Checks whether the dialed fax/telephone number and the sender information of recipient's fax
machine are the same. If not, stop sending faxes.
Hook key setting
Selects whether to enable or disable the
handset of the telephone when sending a fax.
Advanced Guide .
Hook button on the machine to dial without picking up the
Page top