Nokia E72 User Manual page 148

To change the priority of the EAP plug-in settings, select
Options Raise priority
>
before other plug-ins when connecting to the network
with the access point,
this plug-in for network authentication after attempting
to use other plug-ins.
See the device help for more information on EAP plugins.
Edit registration servers
Select Options
>
server.
Select from the following:
Registrar server address — Enter the host name or IP
address of the registrar server in use.
Realm — Enter the registrar server realm.
User name and Password — Enter your user name and
password for the registrar server.
Transport type — Select UDP,
Port — Enter the port number of the registrar server.
Configuration settings
Select Menu Ctrl. panel
>
Configurations.
You can receive messages from your service provider or
company information management containing
configuration settings for trusted servers. These settings
are automatically saved in Configurations. You may
148
to attempt to use the plug-in
orOptions Lower priority
>
New SIP profile or Edit
Automatic
Settings and
>
receive configuration settings for access points,
multimedia, or e-mail services, and instant messaging (IM)
or synchronization settings from trusted servers.
to use
To delete configurations for a trusted server, select
Options
applications provided by this server are also deleted.
Restrict packet data
Select Menu
Registrar APN control.
>
With the access point control service, you can restrict
packet data connections from your device to certain access
points only. Your SIM card may not support the access
point control service. For more information, contact your
service provider.
To restrict packet data connections from your device,
select Options
PIN2 code to activate and deactivate access point control
or TCP.
or to edit the packet data access points on the control list.
To add access points that can be used for packet data
connections to the control list, select
Connection
>
name
provided access point, create an empty access point.
To remove access points from the list, select
Remove.
> Delete. The configuration settings for other
Ctrl. panel Settings
> >
Activate restrictions. You need your
>
manually. To enable connections to an operator-
and Connection
>
Options Add
>
Options
>