Connection Settings - Nokia E72 User Manual

Network settings
Select Menu Ctrl. panel
>
Network.
To select the network mode, select
Dual mode, UMTS, or GSM. In dual mode, the device
switches automatically between networks.
Tip: Selecting UMTS enables faster data transfer, but may
increase the demand on battery power and reduce the
battery life. In regions close to both GSM and UMTS
networks, selecting Dual mode
jumping between the two networks, which also increases
the demand on battery power.
To select the operator, select
Manual to select from available networks, or
to set the device to select the network automatically.
To set the device to indicate when it is used in a
microcellular network (MCN), select
On.

Connection settings

Select Menu Ctrl. panel
>
Select from the following:
Bluetooth — Edit the Bluetooth settings.
USB — Edit the data cable settings.
Settings and Phone
> >
Network mode
may cause constant
Operator selection and
Automatic
Cell info display
Settings and Connection.
>
Destinations — Set up new or edit existing access points.
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit or remove them.
and VPN — Manage the settings for virtual private
networking.
Packet data — Define when packet data network is
attached, and enter the default packet switched access
point name if you use your device as a modem for a
computer.
Wireless LAN — Set the device to display an indicator
when a wireless LAN (WLAN) is available, and define how
often the device searches for networks.
Video sharing — Enable video sharing, select the SIP
profile for video sharing, and define the video saving
settings.
XDM profile — Create an XDM profile. The XDM profile is
required for many communications applications, for
example, presence.
Presence — Edit the settings for presence (network
>
service). To register for the service, contact your service
provider.
Remote drives — Connect the device to a remote drive.
Configurations — View and delete trusted servers from
which your device may receive configuration settings.
APN control — Restrict packet data connections.
141