Batteries - Brother PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer User Manual

Notes on the AC adapter
☞ Only use the AC adapter designed exclusively for this machine.
☞ Disconnect the AC adapter if you do not intend to use this P-touch labeler for an
extended period of time. When the power is disconnected and without battery power, all
text shown in the display and stored in the memory will be lost.

Batteries

Installing the batteries
This machine has been designed to allow you to change the batteries quickly and easily.
With batteries installed, this compact and portable machine can be used anywhere.
1
Notes on batteries
☞ This P-touch labeler requires six AA-size (LR6) batteries. Rechargeable
AA-size (Ni-MH) batteries can be used instead of the six alkaline batteries.
☞ The AA-size (Ni-MH) batteries cannot be recharged by leaving them in the P-touch
labeler with the AC adapter connected. Instead, recharge these rechargeable batteries by
using a battery charger designed specifically for the type or rechargeable batteries used.
For more details on the rechargeable batteries, refer to the instructions provided with
them.
☞ Do not use any of the following, otherwise battery leakage or damage may occur.
• Manganese batteries
• A combination of new and used batteries
• A combination of batteries of different types (alkaline and Ni-MH), different
manufacturers or different models
• A combination of recharged and uncharged batteries
6
2