Entering A Bar Code - Brother PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer User Manual

4
For each additional accented character, repeat steps
Press n.
5
☞ To type in an uppercase accented character, press
Caps mode) before pressing the letter key.

Entering a bar code

The Bar Code function allows bar codes to be printed as part of labels.
☞ Since this machine is not specifically designed for special bar code label-making,
some bar code readers may not be able to read the labels.
☞ Bar code readers may not be able to read bar codes printed with certain ink colors on
certain label tape colors. For best results, print bar code labels using black on white
tape.
In addition, the various bar code parameters enable you to create more customized bar
codes.
PROTOCOL
(numbers printed below bar code)
CHECK DIGIT
☞ The CHECK DIGIT parameter is only available with the CODE 39, I-2/5 and
CODABAR protocols.
Parameter
WIDTH
(bar width)
UNDER#
2
h
(or press
Settings
CODE 39, I-2/5, EAN13, EAN8, UPC-A,
UPC-E, CODABAR, EAN128, CODE128
SMALL, MEDIUM, LARGE
ON, OFF
OFF, ON
3
and .
g h
, then to enter
23