Verifying Music-On-Hold - Cisco VGD-1T3 Software Configuration Manual

Configuring MGCP Gateway Support
Command or Action
Step 4
ccm-manager music-on-hold bind interface
Example:
Router(config)# ccm-manager music-on-hold bind
async
Step 5
exit
Example:
Router(config)# exit

Verifying Music-on-Hold

Use the show commands described in this section to verify music-on-hold.
SUMMARY STEPS
1.
2.
DETAILED STEPS
Step 1 show running-config
Use the show running-config command to verify the MOH configuration, for example:
Router# show running-config
.
.
.
ccm-manager redundant-host 10.0.0.21
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.0.0.21
ccm-manager config
!
show ccm-manager music-on-hold
Step 2
Use the show ccm-manager music-on-hold command to display information about the currently active
MOH sessions, for example:
Router# show ccm-manager music-on-hold
Multicast
Address
10.10.20.22
Note For a description of the fields displayed in this output, see the individual commands in the
Voice Command
Cisco VGD 1T3 Voice Gateway Software Configuration Guide
138
show running-config
show ccm-manager music-on-hold
RTP Packets
Port In/Out
16256 3000/3000
Reference.
Using Cisco Unified Communications Manager to Configure MGCP Gateway Support
Purpose
(Optional) Binds the multicast MOH feature to a
designated interface.
Exits global configuration mode.
Call
ID Protocol
1 IGMP
Incoming
Interface
fe0/0
Cisco IOS