Film Winding Automatic Gear; Maximum Continuous Shooting - Canon EOS 1 Instructions Manual

Changing the Film Winding Mode
ONE SHOT
Film Winding Automatic Gear Switching Function
If film winding becomes an excessive burden to the camera due to a sharp drop in battery
capacity (which can occur when shooting in a cold environment), the film winding system
automatically switches gears to reduce the winding speed and minimize battery drain.
When this occurs, one of the film winding mode indicators (
the LCD panel.
To cancel this function and return to normal-speed winding, open the palm door and press
the < > button and <
battery. When the camera automatically switches to reduced-speed winding, check the
battery level (see page 15) and replace the battery or prepare a new battery as indicated.
• When film winding or rewinding stops in mid-operation, the "
LCD panel. When the battery is replaced with a new one, film winding continues auto-
matically. If the camera stopped in the middle of rewinding, press the film rewind button
( ) to continue the rewinding operation.
• Do not dispose of the battery if its capacity drops due to cold shooting conditions. Its
capacity may return when it returns to normal temperature.
● Maximum Continuous Shooting Speed in Different AF Modes
(frames/sec.)
Continuous exposure (
• Refer to page 97 for the maximum shooting speeds in different AF modes with
Power Drive Booster E1.
68
2
Turn the main dial to the left or right
until the desired film winding mode
is displayed in the LCD panel.
3
To complete the setting, press the
shutter halfway or wait until the six-
second timer elapses.
> button simultaneously or when you replace the film or
One-shot/Manual
) approx. 3 fps
• • • ) blinks in
" indicator blinks in the
AI Servo
approx. 2.5 fps