Recalling Mix Scenes - Yamaha Programmable Mixer 01 User Manual

64
Chapter 7: Scene Memories
1. Press [RECALL].
The MEMORY RECALL LCD
function appears. You can
also go to the MEMORY LCD
function by pressing the
[INC+] [DEC–] buttons.
2. Use the [INC+] [DEC–] but-
tons or the PARAMETER
wheel to select a mix scene.
3. Press [RECALL] to recall.
The mix scene is recalled and
its name and number appear
in the MEMORY area of the
display.
ProMix 01 User's Guide

Recalling Mix Scenes

Mix scenes are recalled using the [RECALL] button. They can also be
recalled using MIDI Program Changes. See "Program Change" on
page 82.
Shown below is the MEMORY RECALL LCD function that appears
when [RECALL] is pressed. Mix scenes are listed in the center and the
name of the mix scene last recalled or stored is highlighted. Also there
is an equal symbol (=) between the program's name and number, not
a period like the other programs. When another mix scene is selected,
its name flashes. If it is recalled, it stops flashing, appears highlighted,
and the period between its name and number changes to an equal
symbol (=).
Note: When you recall a mix scene, all mix settings in the Edit Buffer
(current mix scene) are overwritten. So you may want to store the Edit
Buffer to an unused scene memory before recalling, just in case.