Preset Effects Program Parameters - Yamaha Programmable Mixer 01 User Manual

Preset Effects Program Parameters

Program 1—REVERB HALL 1
Simulates the reverb of a large concert hall.
Parameter Setting
Rev.time 2.8s
High Ratio 0.8
Diffusion 6
Ini.Dly 40.0ms
LPF 7.0kHz
HPF THRU
Program 2—REVERB HALL 2
This is a variation of program 1.
Parameter Setting
Rev.time 3.2s
High Ratio 0.7
Diffusion 8
Ini.Dly 38.0ms
LPF 6.3kHz
HPF THRU
Program 3—REVERB ROOM 1
Simulates the reverb of a concrete-walled room that produces a lot of echo. Use it to add a live atmosphere to drum sounds.
Parameter Setting
Rev.time 1.4s
High Ratio 0.8
Diffusion 7
Ini.Dly 5.0ms
LPF THRU
HPF 280Hz
Program 4—REVERB ROOM 2
This is a variation of program 3.
Parameter Setting
Rev.time 1.8s
High Ratio 0.6
Diffusion 6
Ini.Dly 17.0ms
LPF 9.0kHz
HPF 80Hz
Range Description
0.3–30.0s Reverb time.
0.1–1.0 High frequency decay ratio.
0–10 Reverb diffusion.
0.1–200.0ms Initial delay between the direct sound and early reverb reflections.
1.0kHz–16.0kHz, THRU Low pass filter cutoff frequency.
THRU, 32Hz–8kHz High pass filter cutoff frequency.
Range Description
Same as program 1 Same as program 1
Range Description
Same as program 1 Same as program 1
Range Description
Same as program 1 Same as program 1
Preset Effects Program Parameters
ProMix 01 User's Guide
37