Day To Day Operation; Select Tv/Radio Mode - Philips DTR500/05 User Manual

NOTICE DTR 500.qxd
6

Day to day operation

6.1 Switch your receiver ON/OFF
(standby)
Your receiver is in standby mode (the red LED is on).
To wake up your receiver:
- Press one of the following remote control buttons: <P+>,
<P>, <OK> or a number button.
- Alternatively, press the <Standby> button on the front
panel.
You are watching digital TV (the green LED is on) or
listening to digital radio (the green/orange LED is blinking).
To put your receiver in standby:
- Press the remote standby button.
- Alternatively, press the <Standby> button on the front
panel.
Your receiver, as any electronic equipment, is
power consuming. In order to reduce power
consumption, please switch your receiver to
standby whenever you are not using it. - For saving energy
compared to the stand by mode, if you are not using your
receiver for a longer period of time, we recommend to
switch off the receiver by unplugging it from the mains.
6.2

Select TV/Radio mode

Your receiver is in TV mode.
To switch to RADIO mode:
- Press the <TV/RADIO> button.
Your receiver is in radio mode
To switch to TV mode:
- Press the <TV/RADIO> button.
7/09/2004 15:24 Page 17
DAY TO DAY OPERATION 17