Day To Day Operation; Turn On Your Receiver Or Switch To Low Power; Wake Up Your Receiver Or Switch To Standby; Change Channel - Philips DTR4610 User Manaul

5 Day to Day operation

5.1 Turn ON your receiver or switch to low power

While your receiver is in "low power", the only way to turn it on is to press the LOW POWER
button on the front panel.
While watching digital TV or listening to digital radio, press the LOW POWER button on the
front panel to switch your receiver to "low power".

5.2 Wake up your receiver or switch to standby

While watching digital TV or listening to digital radio, press the standby key of the remote control
to switch your receiver to standby.
While your receiver is in standby, to wake it up:
- Either press the P+, P-, RADIO or any number key of the remote control.
- Or press the PROG-/PROG+ or TV/RADIO button on the front panel.

5.3 Change channel

When you are watching digital TV or listening to digital radio, there are different ways of changing
channel.

5.3.1 Using number keys

Enter the desired channel number using number keys.

5.3.2 Using P+ and P-

Press P+ to select the next channel in the current list, or P- to select the previous channel in the
current list.
Note: Skipped channels cannot be selected using P P + + or P P - - ; they can only be selected either using the
number keys or from a channel list.
TV Channel List

5.3.4 Using BACK (last channel recall)

Press the BACK key to return to the previously selected channel.

5.3.3 Using the channel list(s)

- Press the FAV key to open the current channel list.
- Scroll to the desired channel, and then press OK to
select it.
- Alternatively, press FAV, and then use the C or B to
enable another channel list to choose from.
Note: empty lists are not displayed.
DAY T O DAY O P E R AT I O N 9