System Settings; Vcr - Philips DTR500/05 User Manual

NOTICE DTR 500.qxd
24 CHANGE THE SETTINGS OF YOUR RECEIVER
7/09/2004 15:25 Page 24
7.2.3
The selection is on the System settings item of the
Preferences sub-menu.
- Press the
Note: if the parental control is active, you must enter your PIN
code to access the relevant sub-items of this menu item.
7.2.3.1 TV
This item is used to select the format of the signal output
for the TV and VCR SCART socket.
- Scroll to the setting you want to change.
The corresponding values are displayed on the right-hand
side of the screen.
- Press the
• Video Output: RGB, CVBS-PAL, CVBS-SECAM, or Y/C.
RGB is the default and recommended setting.
• Audio Output: Stereo or Mono
• Screen format: select the aspect ratio of the video
output that best suits your TV.
Note: it is recommended to use the RGB setting to get the best
quality of the video at the TV screen. If you use a video
projector instead of a TV set, the Y/C setting is recommended
(refer to paragraph 4.3 for connection and installation).

7.2.3.2 VCR

This item is used to select the format of the signal output
for the VCR SCART socket.
- Scroll to the setting you want to change.The
corresponding values are displayed on the right-hand side
of the screen.
- Press the
• Video Output: CVBS-PAL, CVBS-SECAM, or Y/C.
CVBS-PAL is the default and recommended setting.
• Audio Output: Stereo or Mono
• Easy Record: select the control method that suits your
VCR. Refer to paragraph 9.2 and your VCR user
manual.
Note: If you have a S-Video VCR Recorder, select the Y/C setting.
Please consult the user manual of your VCR/Recorder.

System settings

button to access the system settings.
i
button to access the available values:
i
button to access the available values:
i