Table of Contents
Advertisement
Non-Fading level cannot be preset into the memory.
DSP(Digital Signal Processor) System
Turning the DSP effects ON or OFF.
A DSP is a device which uses digital control to correct the audio
signal and produce sound effects that can compensate for the
small passenger compartment of a vehicle.
Turn DSP System ON
Press the [DSP] button.
"DSP CONTROL MODE" is displayed.
Turn DSP System OFF
Press the [DSP] button for at least 1 second.
"DSP OFF" is displayed.
Sound Field Setting
This function reproduces many different virtual sound fields.
1
Enter the DSP control mode
Press the [DSP] button.
"DSP CONTROL MODE" is displayed.
2
Selecting the sound field setting
Press the [DSP] button.
Each time the button is pressed the sound field setting switches
as shown below.
Setting
Stadium
Concert Hall
Club Disco
Church
Listening
Bypass
When operation stops for 10 seconds, the Sound Field Setting
closes.
Preset Equalizer Curve Selection
Recall the preset equalizer curve classified in groups.
1
Enter the Equalizer control mode
Press the [EQ] button.
"EQ CONTROL MODE" is displayed.
2
Select an equalizer curve
Press the [EQ] button.
Each time the button is pressed the preset equalizer curve
switches.
Setting
Flat
Rock
Pops
Dance
Vocal
When Equalizer Curve is adjusted, the selection starts from "User".
Ending of Equalizer control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the Equalizer control
mode closes.
— 17 —
Display
"STADIUM"
"CONCERT"
"CLUB DISCO"
"CHURCH"
"LISTENING"
"BYPASS"
Display
"Flat"
"Rock"
"Pops"
"Dance"
"Vocal"
Advertisement
Table of Contents
