Clock Display; Adjusting Time; Disabled System Indicator (Dsi); Theft Deterrent Faceplate - Kenwood KRC-S300 Instruction Manual

Clock Display
Display the time.
Switching to Time Display:
Keep pressing the CLK button until the clock is displayed
Adjusting Time
Adjust the time.
1 When the time is not displayed, first press the CLK button to
display the time.
2 When holding down the CLK button, press the <4 or mei but
ton to adjust the time
The td button adjusts the hour and the rl button adjusts
the minutes
Funetion of the KRC-S300/S200
Disabled System Indicator (DSI)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves. The factory default for
this function is ON.
Turning Disabled System Indicator On/Off:
1 Turn the power of the unit off
2 Simultaneously press the #1 and #3 buttons as you turn the
power back on.
Repeat steps 1 and 2 above to turn DSI back on
Function of the KRC-S300/S200
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Projections me
i Release button
Groaves x
2 a
Removing the Faceplate:
Press the retease button
The laceplate is unlocked, allawing you to detach it
| NOTE |
* The faceplate is a precision prece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case while detached
Te
* Do not expose the faceplate or its storage case to direct sun-
hight or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing
Reattaching the Faceplate:
1 Align the projections on the unit with the grooves on the face
plate.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit
15