Show Lldp Interface - Dell PowerEdge M420 Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example displays the current LLDP configuration summary.
console# show lldp
Global Configurations:
Transmit Interval: 30 seconds
Transmit TTL Value: 120 seconds
Reinit Delay: 2 seconds
Notification Interval: limited to every 5 seconds
console#show lldp
LLDP transmit and receive disabled on all interfaces

show lldp interface

Use the show lldp interface command in Privileged EXEC mode to display
the current LLDP interface state.
Syntax
unit/slot/port
show lldp interface {gigabitethernet | tengigabitethernet
unit/slot/port
| all }
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
542
LLDP Commands