logging email urgent
Use the logging email urgent command in Global Configuration mode to set
the lowest severity level at which log messages are emailed in an urgent
manner. To revert the urgent severity level to its default value, use the no
form of this command.
Syntax
logging email urgent {
no logging email urgent
Parameter Description
Parameter
severity
none
Default Configuration
The default severity level is alert.
358
Email Alerting Commands
severity
| none}
Description
Log messages at or above this severity level are emailed
immediately. The severity level may either be specified by
keyword or as an integer from 0 to 7. The accepted keywords,
and the numeric severity level each represents, are as follows.
• emergency (0)
• alert (1)
• critical (2)
• error (3)
• warning (4)
• notice (5)
• info (6)
• debug (7)
If you specify this keyword, no log messages are emailed
urgently. All log messages at or above the non-urgent level
(configured with the logging email command) are emailed in
batch.