Dell PowerEdge M420 Reference Manual page 134

Command
area virtual-link
retransmit-interval
area virtual-link
transmit-delay
default-information
originate
default-metric
distance ospf
enable
exit-overflow-interval
external-lsdb-limit
ipv6 ospf
ipv6 ospf area
ipv6 ospf cost
ipv6 ospf dead-interval
ipv6 ospf hello-interval
ipv6 ospf mtu-ignore
ipv6 ospf network
ipv6 ospf priority
ipv6 ospf retransmit-
interval
134
Command Groups
Description
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
areaid neighbor
by and
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
areaid neighbor
by and
Controls the advertisement of default routes.
Sets a default for the metric of distributed routes. ROSV3
Sets the route preference value of OSPF in the
router.
Resets the default administrative mode of OSPF
in the router (active).
Configures the exit overflow interval for OSPF.
Configures the external LSDB limit for OSPF.
Enables OSPF on a router interface or loopback
interface.
Sets the OSPF area to which the specified router
interface belongs.
Configures the cost on an OSPF interface.
Sets the OSPF dead interval for the specified
interface.
Sets the OSPF hello interval for the specified
interface.
Disables OSPF maximum transmission unit
(MTU) mismatch detection.
Changes the default OSPF network type for the
interface.
Sets the OSPF priority for the specified router
interface.
Sets the OSPF retransmit interval for the
specified interface.
.
.
a
Mode
ROSV3
ROSV3
ROSV3
ROSV3
ROSV3
ROSV3
ROSV3
IC
IC
IC
IC
IC
IC
IC
IC
IC