Welcome
Thank you for choosing a Cisco SPA100 Series Analog Telephone Adapter.
This product family includes the following models:
• SPA112 Two-Port Phone Adapter: 2 FXS ports and 1 10/100 WAN
port.
• SPA122 ATA with Router: 2 FXS ports, 1 10/100 WAN port, 1 10/100
LAN port, and built-in router.
This guide describes how to physically install the equipment and how to
get started with the configuration.
Before You Begin
1
Before you begin the installation, make sure that you have the following
equipment and services:
• An active Internet account and Voice over IP account
• Ethernet cable to connect to your broadband network device
• Phone to connect to your SPA112/122
• Phone cable to connect your phone
• Optional: Uninterruptible Power Supply (UPS) to provide backup power
Product Features
2
Top Panel
2
Cisco SPA100 Series Analog Telephone Adapters