Install The Display Unit - Sony SU-XTQ005 Owner's Manual

Ensure that the turntable located at the bottom
of the Table-Top Stand is placed correctly. You
will hear a light click when the turntable is
placed correctly.
Bottom of Table-Top Stand
Turntable
Note
Incorrect placement of the turntable may cause the
wrong viewing angle.

Install the Display Unit

1
Attach the Display Unit to the
Table-Top Stand.
Use the screw alignment holes on the rear of the
Display Unit as guides. Gently lower the Display
Unit to align the holes of the screws over the
joints of the Table-Top Stand.
Turntable stops
once at this point.
z Hint
There are finger slots located at the bottom of the
Display Unit on both sides for holding. When
attaching the Display Unit to the stand, use the slot to
support the bottom and hold the top with your other
hand.
Rear of Display Unit
Bottom of Display Unit
Holes for display
securing screws
Joint Guides
This Display Unit
has finger slots on
both sides at the
bottom for holding.
US
5
(US)