Take The Picture - Canon EOS M EF-M 22mm STM Kit Instruction Manual

With Lenses other than EF-M (Equipped with a Switch)
Use the IS switch on the lens.
Using the Image Stabilizer when Shooting
The Image Stabilizer cannot correct "subject blur", when the subject
moves at the time of exposure.
For bulb exposures, set the IS to <2>. If <1> is set, Image
Stabilizer incorrect operation may occur.
The Image Stabilizer may not be effective for excessive shaking such as
on a rocking boat.
The Image Stabilizer works in all focus modes.
When the IS is set to <2>,
When using a tripod, you can still shoot with the IS set to <1> with no
problem. However, to save battery power, setting the IS to <2> is
recommended.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
Set the STABILIZER switch to
<1>.
Press the shutter button halfway.
1
The Image Stabilizer will operate.

Take the picture.

2
When the picture looks steady on the
LCD monitor, press the shutter button
completely to take the picture.
will appear on the screen.
About the Lens Image Stabilizer
47