Table of Contents
Advertisement
Custom Function SettingsN
3
Custom Functions are organized into four groups based on the function
type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus, C.Fn IV:
Operation/Others.
C.Fn I: Exposure
C.Fn-1
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is
effective when you prefer to control the exposure in less fine
increments than 1/3-stop increments.
With setting 1, the exposure level will be displayed on the LCD monitor as
shown below.
C.Fn-2
0: Off
1: On
When you set the ISO speed, you will be able to set "H" (equivalent to
ISO 25600) for still photos and "H" (equivalent to ISO 12800) for
movies. Note that if [C.Fn-3: Highlight tone priority] is set to [1:
Enable], "H" cannot be set.
284
Exposure level increments
ISO expansion
Advertisement
Table of Contents
