Table of Contents
Advertisement
f: Changing the Autofocus OperationN
In the <a>, <f>, <s>, and <d> shooting modes, you can select
the AF (Autofocus) operation to suit the shooting condition or subject. In
Basic Zone modes, the optimum AF operation is set for the respective
shooting mode.
If focus cannot be achieved, the AF point will turn orange. If this occurs, the
picture cannot be taken even if the shutter button is pressed completely.
Recompose the picture and try to focus again. Or see "Shooting conditions
that make focusing difficult" (p.123).
130
Use the menu or focus mode
1
switch to set the focus to <AF>.
On the Quick Control screen, tap
2
the AF operation button.
Tap the AF operation.
3
Focus the subject.
4
Aim the AF point over the subject and
press the shutter button halfway. The
camera will then autofocus with the
selected AF operation.
Advertisement
Table of Contents
