Arp-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

ARP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
%s(%s) is duplicate of local, %s
Explanation
address.
Recommended Action
Error Message
%s is duplicate of local, %s
Explanation
address.
Recommended Action
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Error Message
Explanation
Recommended Action
all VDCs on the system.
Cisco NX-OS System Messages Reference
2-28
ARP-2-API_INIT Format: Failed to initialize %s API
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-CLI_INIT Format: Failed to initialize CLI
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-DUP_SRC_IP Format: Source address of packet received from %s on
There may be another router on this network that is configured with the same IP
Check all routers on the interface for a misconfiguration.
ARP-2-DUP_SRCIP Format: Source address of packet received from %s on
There may be another router on this network that is configured with the same IP
Check all routers on the interface for a misconfiguration.
ARP-2-INIT_FAIL Format: Initialization failure
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-MQ_OPEN Format: Failed to open message queue %s: %s
An unrecoverable software error has occurred during ARP initialization.
Use 'reload' command to reload the system. Be aware that this problem affects
ARP-2-MQ_RECV Format: Message queue receive failed on %s queue: %s
An unexpected fatal error has occurred.
Use 'reload' command to reload the system. Be aware that this problem affects
Chapter 2 System Messages and Recovery Procedures
OL-15994-03