Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 59

Chapter 5 Configuring VSANs and Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the Create VSAN dialog box. (See
Figure 5-3
Complete the fields in the Create VSAN dialog box.
Step 2
•
•
•
•
•
•
•
OL-7765-05
Create VSAN
Select the switches that you wish to assign to the VSAN. For example, in
is the switch selected to be assigned to a VSAN.
Select a VSAN ID for the VSAN.
Assign a name to the VSAN. For example, in
Select the type of load balancing used on this VSAN. We recommend that, for this setup, you select
the srcdst Ox-ld option, which is the default option.
srcdst—Use source and destination ID for path selection.
–
srcdst Ox-ld—Use source, destination, and exchange IDs.
–
Select the interoperability value configured for the local switch on this VSAN. We recommend that,
for this setup, you select the default option.
Select the Admin State for the VSAN. We recommend that, for this setup, you select the active
option, which is selected by default.
Check the Static Domain IDs check box to assign a persistent domain ID to the VSAN. For
example, in Figure 5-3, the domain ID for the switch is 1; this ID is the domain ID assigned to the
switch on VSAN_test.
See Appendix C, "Configuring Static Domain IDs and Persistent FC IDs,"
Figure 5-3.)
Figure 5-3, VSAN_test is the assigned VSAN name.
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
Creating VSANs
Figure 5-3, switch_name
for details.
5-3