Fabric Manager Client Quick Tour - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Fabric Manager Client Quick Tour

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Fabric Manager Client Quick Tour
This section helps you get familiar with the various icons and sections that enable navigation in the
Fabric Manager Client interface, as shown in
Figure 4-7
1
2
3
4
5
6
7
8
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
4-6
Fabric Manager Main Window
Menu bar—Provides access to options that are organized by menus.
Toolbar—Provides icons to access the most commonly used options on the File, Tools, and Help
menus.
Information pane—Displays information about whatever option is selected in the menu tree.
Status bar (right side)—Shows the last entry displayed by the discovery process, and the possible
error message.
Fabric pane—Displays a map of the network fabric, including switches, hosts, and storage. It also
provides tabs for displaying log and event data.
Logical domains—Displays a tree of configured SANs, fabrics, VSANs, and zones.
Physical attributes—Displays a tree of available configuration tasks depending on the SAN,
fabric, VSAN, or zone selected above. Lists the switches and end devices in the logical selection.
Status Bar (left side)—Shows short-term transient messages, such as the number of rows
displayed in a table.
Figure 4-7.
Chapter 4 Fabric Manager Client
OL-7765-06