Committing The Rscn Timer Configuration Changes; Discarding The Rscn Timer Configuration Changes; Displaying Rscn Configuration Distribution Information - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Chapter 41 Managing FLOGI, Name Server, FDMI, and RSCN Databases
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
•

Committing the RSCN Timer Configuration Changes

If you commit the changes made to the active database, the configuration is committed to all the switches
in the fabric. On a successful commit, the configuration change is applied throughout the fabric and the
lock is released.
To commit RSCN timer configuration changes, perform this task:
Command
Step 1
switch# configuration terminal
switch(config)#
Step 2
switch(config)# rscn commit vsan timeout

Discarding the RSCN Timer Configuration Changes

If you discard (abort) the changes made to the pending database, the configuration database remains
unaffected and the lock is released.
To discard RSCN timer configuration changes, perform this task:
Command
Step 1
switch# configuration terminal
switch(config)#
Step 2
switch(config)# rscn abort vsan timeout
Clearing a Locked Session
If you have changed the RSCN timer configuration and have forgotten to release the lock by either
committing or discarding the changes, an administrator can release the lock from any switch in the
fabric. If the administrator performs this task, your changes to the pending database are discarded and
the fabric lock is released.
The pending database is only available in the volatile directory and are subject to being discarded if the
Tip
switch is restarted.
To use administrative privileges and release a locked DPVM session, use the clear rscn session vsan
command in EXEC mode. The following example shows how to clear the RSCN session for VSAN 10:
switch# clear rscn session vsan 10

Displaying RSCN Configuration Distribution Information

The following example shows how to display the registration status for RSCN configuration distribution:
switch# show cfs application name rscn
Enabled
Timeout
OL-16597-01
A copy of the configuration database becomes the pending database along with the first active
change.
: Yes
: 5s
Purpose
Enters configuration mode.
Commits the RSCN timer changes.
Purpose
Enters configuration mode.
Discards the RSCN timer changes and clears the
pending configuration database.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
RSCN
41-9