Installing, Removing, And Maintaining Gbics; Gbic Features - Cisco 2948G - Catalyst Switch Hardware Installation Manual

Installing, Removing, and Maintaining GBICs

Installing, Removing, and Maintaining GBICs

GBIC Features

Warning
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
4-2
The following sections describe Gigabit Interface Converters (GBICs) and how to
install, remove, and maintain them:
GBIC Features, page 4-2
•
• Port Cabling Specifications, page 4-4
GBIC Optical Power Characteristics, page 4-5
•
• GBIC Cabling Restrictions, page 4-5
Installing GBICs, page 4-6
•
Removing GBICs, page 4-9
•
• GBIC Maintenance Guidelines, page 4-10
Patch Cord, page 4-10
•
Because invisible laser radiation may be emitted from the aperture of the port
when no cable is connected, avoid exposure to laser radiation and do not stare
into open apertures. Statement 70
GBICs (see Figure 4-1) are hot-swappable input/output devices that plug into a
Gigabit Ethernet switching module, linking the module with a fiber-optic
network. The GBICs use SC-type connectors and plug into connectors on the
module. You can install any combination of GBICs in the Gigabit Ethernet
switching module.
Chapter 4 Configuring the Gigabit Ethernet Ports
78-6286-05