Installing The Catalyst 2948G-Ge-Tx Switch - Cisco 2948G - Catalyst Switch Hardware Installation Manual

Chapter 3 Installing the Switch
Figure 3-2 Installing the Switch in the Rack
17.75 inches (45.09 cm) 17.75 inches (45.09 cm) 17.75 inches (45.09 cm)
ST AT US
Ca tal ys
t 29 48 G

Installing the Catalyst 2948G-GE-TX Switch

Warning
78-6286-05
To prevent bodily injury when mounting or servicing this unit in a rack, you
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
Installing the Catalyst 2948G-GE-TX Switch
Statement 1006
3-9