Upgrading The Mp101 Digital Music Player; Resetting The Defaults - NETGEAR MP101 - Network Audio Player User Manual

The WEP Security screen will now be displayed. Detailed instructions for configuring WEP
6.
can be found on
The system reboots and connects to the selected wireless network.
7.

Upgrading the MP101 Digital Music Player

Do not play music on the MP101 Digital Music Player during the upgrade.
To upgrade the MP101 Digital Music Player:
On your PC, download new firmware from the http://www.NETGEAR.com support site.
1.
Run the firmware installer program, as described in the firmware release notes.
2.
From the Setup menu, select Maintenance.
3.
M a i n t e n a n c e
Select Upgrade to upgrade. The display will show messages as information that is downloaded
4.
to the player. When the upgrade is complete the display will show the following message:
The unit reboots and reconnects to the last network used.

Resetting the Defaults

To reset the MP101 Digital Music Player back to the factory defaults:
Configuration and Maintenance
page 1-7 in Step 3.
U p g r a d e
R e s e t F a c t o r y
S c r e e n B r i g h t n e s s
U p g r a d e
C o m p l e t e
R e b o o t i n g
P l e a s e
User's Manual for the MP101 Digital Music Player
D e f a u l t
W a i t
3-5