Displaying Wireless Link Information; Manual Wireless Configuration - NETGEAR MP101 - Network Audio Player User Manual

Select Static IP Address.
4.
E n t e r
[
Use the number buttons on the remote control to enter the IP Address. Use the
5.
save each number and move to the next field. After the IP address is set, enter the subnet mask.
E n t e r
[

Displaying Wireless Link Information

The Wireless menu can be used to see the current link status and to manually configure the
wireless network. Manual configuration may be necessary if SSID broadcast is disabled in the
Access Point or if you want to set up an Ad Hoc network.
To display the current wireless link status:
From the Setup menu, select Network Setup.
1.
N e t w o r k
From the Network Setup menu, select Wireless.
2.
W i r e l e s s
From the Wireless Menu, select Link Info. The current SSID, channel and network mode are
3.
displayed. Scroll down to see the WEP status and signal strength.

Manual Wireless Configuration

Note: Detailed background on wireless networking can be found in
Networking Basics.
Configuration and Maintenance
I P
0 ] . 0 .
M a s k
0 ] . 0 .
S e t u p
I P A d d r e s s
W i r e l e s s
L i n k I n f o
A v a i l a b l e
N e w / H i d d e n
User's Manual for the MP101 Digital Music Player
0 . 0
0 . 0
N e t w o r k s
N e t w o r k
button to
[OK]
Appendix B, Wireless
3-3