NETGEAR MP101 - Network Audio Player User Manual page 15

Note: Detailed background on wireless networking can be found in
Networking Basics.
To start the MP101 Digital Music Player on a wireless network:
Plug in your player. The display will show start-up messages as it scans for wireless networks.
1.
Up to 30 networks that are detected will be displayed. Also displayed for each network will be
the type of network (Infrastructure or Ad-Hoc), whether security is enabled or disabled, and
the wireless channel.
A v A I L A B L E
Note: If the MP101 cannot detect a wireless network, you may have to select Available
Networks to re-scan. If you have disabled broadcast of SSIDs on your network, see
Wireless Configuration on page
Select the desired network. If the selected wireless network has Wireless Encryption (WEP)
2.
disabled, you do not need to configure WEP encryption and can skip to Step 4. If the selected
wireless network has WEP enabled, the MP101 will automatically detect it and bring up the
WEP Security screen.
The WEP Security screen will guide you through WEP configuration. At any point you can
3.
press [ ] to move to the previous screen.
The current WEP Setting is shown.
a.
W E P
Press to accept the setting or press [ ] to change the setting. WEP can be disabled,
[OK]
or set to either 64- or 128-bit encryption strength.
WEP Key.
b.
W E P
Select the method for creating WEP data encryption keys.
Setting Up the MP101
I
( 3 ) N E T G E A R
F
I
( 9 ) W i r e l e s s
F
3-3.
S e c u r i t y
D i s a b l e d
O K t o a c c e p t ,
K e y
P a s s p h r a s e
M a n u a l K e y s
User's Manual for the MP101 Digital Music Player
N E T W O R K S
t o
Appendix B, Wireless
Manual
e d i t
1-7