Additional Information; Using A Usb Ac Adaptor; Disconnecting The Ic Recorder From The Ac Outlet - Sony ICD-UX502 Operating Instructions Manual




Additional Information

Using a USB AC Adaptor

You can use the IC recorder by connecting the IC recorder to an AC outlet
using a USB AC adaptor (not supplied). It is useful when you want to record
for a long time.

Connect a USB AC adaptor to an AC outlet.

Slide the USB DIRECT slide lever on the back of the IC recorder and
connect the USB connector to the USB AC adaptor.

Disconnecting the IC recorder from the AC outlet

Follow the procedures below; otherwise, when the IC recorder contains data
files, the files may be damaged or become unplayable.

If you are recording or playing back a file, press  STOP to put the
IC recorder into the stop mode.

Make sure that the operation indicator of the IC recorder does not
light.

Disconnect the IC recorder from the USB AC adaptor, and then
disconnect the USB AC adaptor from the AC outlet.
Additional Information
USB connector of
the IC recorder
USB AC adaptor
(not supplied)