Table of Contents
Advertisement
Editing Files
Protecting a File
To prevent a file from being accidentally erased or edited, you can protect an
important file. A protected file is marked with the (protect) indicator and is
regarded as a read-only file you cannot erase or edit.
Display the file which you want to protect from the tab or the
tab.
In the stop mode, press MENU/NOISE CUT. Select
the tab
"Set Protection?" will be displayed.
Press or to select "Execute," and then press /ENT.
The file is protected. A protected file is marked with the (protect)
indicator.
Press STOP to exit the menu mode.
To release protection
Select the protected file, and then proceed with steps through . In this
case, "Erase Protection?" will be displayed in step .
"Protect," and then press /ENT.
STOP
/ENT
MENU/NOISE CUT
,
Advertisement
Table of Contents
