Table of Contents
Advertisement
Erasing Files
Erasing a File
You can select a file and erase it as follows.
Note
Once a file has been erased, you cannot retrieve it.
Slide the HOLD•POWER switch in the direction of "POWER" to turn
on the IC recorder ( p. 17), or towards the center to release the IC
recorder from the HOLD status ( p. 14).
The stop mode window appears.
In the stop or playback mode, select the file you want to erase
( p.22).
Press ERASE.
"Erase?" is displayed and the specified file is played
back for confirmation.
Press or to select "Execute."
Press /ENT.
The "Erasing... " animation appears in the display window and the selected
file will be erased.
When a file is erased, the remaining files will advance so that there will be
no space between files.
To cancel erasing
Select "Cancel" in step , and then press /ENT.
To erase a part of a file
Divide the file into two files first (
through .
Erasing Files
ERASE
HOLD•POWER
,
/ENT
), and then proceed with steps
p. 58
Advertisement
Table of Contents
