Wireless Network Settings For The Computer And Camera; Procedures - Canon PowerShot SD430 Digital ELPH Wireless Settings Manual

Wireless Network Settings for the
This chapter explains how to configure the wireless networking function to connect the camera
to the computer over a wireless connection.

Procedures

Follow the procedures below to configure the wireless settings.
Preparation
Check Your Computer's Operating Environment
Confirm that your computer's operating system is Mac OS X v10.4 or later.
Check Your Wireless Connection Configuration
In order to ensure that the registration procedures for the connection proceed smoothly,
confirm the network configuration for your computer and prepare it as necessary.
Check If Required Software Is Installed
Confirm that the software required for a wireless connection has been installed.
Software supplied with
the camera
Registering the Target Device
Register the Target Device with the Camera
Connect the camera to the computer with the interface
cable and register the target device (your computer)
with the camera.
Computer and Camera
Downloaded
ImageBrowser Wireless
Updater
Downloaded camera
firmware
3