Connecting - Canon PowerShot SD430 Digital ELPH Wireless Settings Manual

Connecting

Connect to the computer using the camera controls.
You will not require an interface cable because you are connecting wirelessly.
Connect after you have registered the target device (computer) according to the procedures in
Registering the Target Device with the Camera (p. 9).
• The wireless networking function can be operated up to approximately 30
meters away with a direct line of sight to the target device. However, this
distance will depend upon the operating conditions.
• You cannot have more than one camera connected at a time.
•You cannot connect to multiple target devices at once. If you are already
connected to one device and attempt to connect another, the current
connection will close and the camera will begin to connect to the new target
device.
• Always use the camera to disconnect from a wireless connection (p. 19).
1
Turn on the camera and set it to the playback
or shooting modes.
Playback Mode
After connecting, you can download camera
images to the computer and print them on a
printer.
Shooting Modes
After connecting, you can transmit a recorded
image immediately to the computer.
See Actions Possible with the Camera Connected to a Computer (p. 21) for details.
• The movie mode cannot be used over a wireless connection.
• You can switch between the playback and shooting modes during a
wireless connection.
2
Press the
A menu for selecting the target device will appear
on the LCD monitor.
The button will light blue.
Alternatively, you can display the menu for selecting the target device by
pressing the MENU button, selecting the [
by the [Connect/Disconnect] option, and pressing the FUNC./SET button.
button.
Power Button
(Wireless)] menu followed
17
Playback
Mode or
Shooting
Modes
Button
FUNC./SET
Button
MENU
Button