Receiving Faxes Into Pc; Before You Begin; Checklist For Machine: Make Sure Mf Link Mode Is Active; Checklist For Pc - Brother IntelliFax-4750 Software Manual

Receiving Faxes into PC

To receive faxes into your PC through the MFC, you must first have
connected your Brother machine to your computer. Then, you can load the
software. (See Chapter 2, Setting Up Brother Machine and PC to Work
Together.)

Before You Begin

Use the following checklists for the Brother machine and PC, to make sure
you have properly set up the machine and PC to work together. See
Installing the Brother Software, page 2-12.

Checklist for Machine: Make Sure MF Link Mode is Active

To receive faxes into your computer, MF Link Mode must be set to ON
and your computer must be turned on with the Multi-Function Link
software running. If your PC is turned off or Multi-Function Link
closed, incoming faxes will be printed at the Brother machine
automatically.
Set MF Link mode to OFF only if you want all incoming faxes to be
printed at the machine.
1
Press ,
Function
2
Use or to select ON (not OFF) and press
3
Press to exit.
Stop

Checklist for PC

1
Make sure the machine is connected to the parallel port of the PC.
2
In the Main Menu, select the Setup pull-down menu.
3
Select Preferences...
4
Under Answer Mode, select Fax only.
5 Click the OK button.
6
Keep the PC and Multi-Function Link
times.
4 - 6
U S I N G M U L T I - F U N C T I O N L I N K
, , .
1
2 0
.
Set
®
Pro Main Menu running at all
®
P R O
®
Pro
®
Pro is