Black And White Video Printing; Changing Default Settings - Brother IntelliFax-4750 Software Manual

Black and White Video Printing

1
With no documents in the feeder, plug the cable from your video camera's
Video Out jack into the Brother machine's RCA pin jack.
2
Play the video. When the Brother machine begins receiving the video
signals, the machine's screen displays
3
Press when you see the picture you want to capture and print.
Copy
4
If you want print multiple pages, use the dial pad to enter the number of
copies (up to 99).
5
Wait five seconds—OR—Press
6
The machine begins printing, and beeps when finished.
If the Brother machine is not receiving video signals,
However, if there is a document in the feeder, the machine will print a
copy of the document.

Changing Default Settings

Press and
Function
default settings for video printing.
By pressing
settings as shown in the following chart. Press
the selection for each setting. Press
Press and
Function
1.QUALITY
2.VIDEO TYPE
3.PRINT SIZE
1 - 2
W A L K - U P
VIDEO:PRESS COPY
CAPTURE READY
to change
3
, and a number, you can adjust video printing
Function
3
.
3
QUALITY:NORMAL
QUALITY:HIGH
VIDEO:MOVING
VIDEO:STILL
SIZE:5.75"X4.25"
SIZE:4"X3"
SIZE:4"X3"X6
V I D E O
again.
Copy
DEFAULT SETTINGS
1. Quality
2. Video Type
3. Print Size
to save your selection.
Set
P R I N T I N G
will not work.
Copy
HIGH
MOVING
5.75" x 4.25"
or to move through
is default