Setting Up Brother Machine And Pc To Work Together; Using Brother Machine With Your Pc; Before You Install Multi-Function Link ® Pro; If You Don't Have A Cd-Rom Drive - Brother IntelliFax-4750 Software Manual

Setting Up Brother Machine
2
2
and PC to Work Together

Using Brother Machine with Your PC

Multi-Function Link
into a multi-function center, by enabling you to use your fax machine as a
printer and a scanner and to use it to fax from Windows
your computer.
The MFC 8600 is a 6 in1 multi-function center. Install the
Multi-Function Link
CD-ROM.
If you have previously installed Brother Multi-Function Link
software for another machine, uninstall it first.
Before you install the Multi-Function Link
you must read the README.WRI file in the root
directory of the CD-ROM (or Floppy Disks) for
important last-minute installation information and

troubleshooting tips.

Before You Install Multi-Function Link
If you have a USB cable (for Windows
Cable to Connect Brother Machine to PC", page 2-2.
If you don't have a USB cable, see "Using Bundled Parallel Cable to
Connect Brother Machine to PC" page 2-10.

If You Don't Have a CD-ROM Drive

All software is supplied on CD-ROM. If you need a Floppy Disk
version for MFC 8600's Multi-Function Link
PCI3D95), call Brother at
USA:
From within Canada:
From within Montreal: 1-514-685-6464
To order the appropriate set of disks, you must tell the Brother Representative
the version of Windows
Only Multi-Function Link
Disks. Multi-Function Link
Disks for Windows NT
®
Pro software (MFL Pro) turns your Brother machine
®
Pro and other Brother software from the bundled
®
you are using and your Brother model number.
®
Pro and PaperPort
®
Pro software is not available on Floppy
®
Workstation Version 4.0.
S E T U P B R O T H E R M A C H I N E W I T H P C
®
®
98 users only), see "Using a USB
®
Pro software (PCI3D31 or
1-888-879-3232
1-800-668-2768
®
are available on Floppy
applications in
®
Pro
®
Pro,
®
Pro
2 - 1