Panel Rear Cover And Control Panel - Brother IntelliFax-3550 Service Manual

1.5

Panel Rear Cover and Control Panel

(1) Place the control panel ASSY upside down.
(2) Remove the document pressure bar, ADF parts, and nip-related parts from the panel
rear cover.
(3) Remove the two screws from the panel rear cover.
(4) While lifting up the front edge of the panel rear cover, unhook it from the 15 pawls "X"
provided on the control panel.
(5) Unhook the control panel PCB from the three pawls "Y" on the control panel and take it
out together with the FPC key.
Control panel
(placed upside down)
Reassembling Notes
• When installing the spring plate B and separation rubber, align their cutouts with the boss
on the panel rear cover.
ADF
parts
3 "Y" pawls
IV – 7
Document pressure bar
Spring plate A
Separation rubber
Spring plate B
Nip-related parts
Panel rear cover
15 "X" pawls
FPC key
Control panel PCB