Epson 2080 - LQ B/W Dot-matrix Printer Service Manual page 10

LQ-2080


Release lever: See the following table.
Table 1-4. Release Lever Settings
Lever Position Paper path / Feeder
Manual insertion (front)
Manual insertion (rear)
Friction
CSF Bin 1
CSF Bin 2
Roll paper holder
Push tractor feed (front)
Front tractor
Push & Pull tractor feed
(front)
Push tractor feed (rear)
Rear tractor
Push & Pull tractor feed
(rear)
Pull tractor feed (front)
Full release Pull tractor feed (rear)
Pull tractor feed
(bottom)
Product Description
Paper / Media
Cut sheet
(Single sheet & Multi part), Card
Cut sheet (Single sheet & Multi part),
Card, Envelope
Cut sheet (Single sheet & Multi part),
Card, Envelops
Cut sheet (Single sheet)
Roll paper
Continuous paper (Single sheet & Multi
part), Continuous paper with labels
Continuous paper (Single sheet & Multi
part), Continuous paper with labels
Continuous paper
(Single sheet & Multi part)
Continuous paper
(Single sheet & Multi part)
Continuous paper (Single sheet & Multi
part), Continuous paper with labels
Continuous paper
(Single sheet & Multi part)
Continuous paper (Single sheet & Multi
part), Continuous paper with labels
Hardware Specifications


Paper thickness lever: See the following table.
Table 1-5. Adjust Lever Setting Position
Paper Thickness (inch)
Setting
Position
Minimum
0 0.0024
1 0.0047
2 0.0074
3 0.0102
4 0.0126
5 0.0141
6 0.0157
Revision A
Paper Thickness (mm)
Maximum
0.0047 over 0.06 up to 0.12
0.0074 over 0.12 up to 0.19
0.0102 over 0.19 up to 0.26
0.0126 over 0.26 up to 0.32
0.0141 over 0.32 up to 0.36
0.0157 over 0.36 up to 0.40
0.0173 over 0.40 up to 0.44
10