Switch Button Descriptions - NETGEAR WNDR3700v1 - N600 Wireless Dual Band Gigabit Router Setup Manual

Table 1. Status Light Descriptions (continued)
Item Function Activity
USB Off
4.
Solid Green
Fast Blinking
Green
5. Internet Off
Solid Amber
Blinking Amber
Solid Green
Blinking Green
LAN Solid Green
6.
(Ports 1–4)
Blinking Green
Solid Amber
Blinking Amber
Off
The WLAN and WPS switch buttons toggle the WLAN and WPS functions on and off.
Table 2.

Switch Button Descriptions

Item Function Activity
WLAN On
7.
On/Off
Off
WPS On
8.
On/Off
Off
Getting to Know Your Wireless Router
Description
No USB device is connected, or the "Safely Remove Hardware"
button has been pressed and it is now safe to remove the attached
USB device.
The USB device has been accepted by the Router and is ready to be
used.
The USB device is in use.
No Ethernet cable is connected to the modem.
The Ethernet cable connection to the modem has been detected.
Initializing connection and obtaining an IP address.
An IP address has been received; ready to transmit data.
Data is being transmitted and received.
The LAN port has detected a 1 Gbps link with an attached device.
Data is being transmitted at 1 Gbps.
The LAN port has detected a 10/100 Mbps link with an attached
device.
Data is being transmitted at 10/100 Mbps.
No link is detected on this port.
Description
Pressing the wireless LAN button turns on the 2.4 GHz and 5 GHz
wireless radios, indicated by 2.4 GHz and 5 GHz LEDs being lit.
The 2.4 GHz and 5 GHz radios are off, and their LEDs are turned off.
The WPS function is turned on. The light below the WPS button
blinks green when the function is first turned on.
Before turning on the WPS button, be sure that the WLAN button is
on. If both wireless radios are off (2.4 GHz and 5 GHz LEDs are off),
the WPS will not work.
The WPS function is turned off.
4