NETGEAR WNDR3400 - N600 Wireless Dual Band Router Setup Manual page 9

Top Panel
Figure 4
The top of the wireless router includes a dome that performs two functions:
1. Antenna display lights. The lights identify the activity of the eight internal antennas, flashing
to show which combination of antennas is receiving the strongest signals. These status lights
are off by default but can be turned on.
2. Push 'N' Connect (WPS). The dome acts as a push-button for the router to enable WPS
security with other WPS-enabled devices. Pushing on the dome for over 5 seconds opens a 2-
minute window for the router to connect with other WPS-enabled devices.
Before using these WiFi Protected Setup (WPS) push-button procedures, verify
that your device (a notebook, adapter, or other device) supports WPS.
To use the WPS method to implement security, see
Configure Your Wireless Network" on page
To turn the antenna display lights on or off:
1. Push the dome, then release. If lights are off, they will turn on.
2. Push the dome, then release. If lights are on, they will turn off.
Getting to Know Your Wireless Router
N600 Wireless Dual Band Router WNDR3400 Setup Manual
"Using Push 'N' Connect (WPS) to
26.
6