Default Configuration Settings - NETGEAR WGT624v4 - 108 Mbps Wireless Firewall Router Reference Manual

Default Configuration Settings

You can use the reset button located on the back of your WGT624 v4 wireless router to reset all
settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold
the reset button for 3 seconds. Your wireless router will return to the factory configuration settings
shown in the table below.
Table A-1. Default Configuration Settings
Feature
Smart Wizard
Router Login
Router Login URL
Login Name (case sensitive)
Login Password (case sensitive)
Internet Connection
WAN MAC Address
MTU Size
Local Network
Router LAN IP address (aka Gateway IP
address)
Router Subnet
DHCP Server
Time Zone
Time Zone Adjusted for Daylight Savings
Time
Firewall
Inbound (communications coming in from
the Internet)
Outbound (communications going out to
the Internet)
Technical Specifications and Default Configuration
108 Mbps Wireless Router WGT624 v4 Reference Manual
Default Behavior
Disabled
http://www. routerlogin.net or http://www.routerlogin.com
admin
password
Use default hardware address
1500
192.168.1.1
255.255.255.0
Enabled
GMT
Disabled
Disabled (bars all unsolicited requests except for traffic
on port 80, the http port)
Enabled (all)
v1.0, May 2007
A-3