Safely Remove A Usb Drive - NETGEAR R6300 User Manual

FTP. Disabled by default.
FTP (via Internet). Disabled by default. If you enable this setting, remote users can
access the USB drive through FTP over the Internet. This setting supports both
downloading and uploading of files.
Available Network Folders
You might need to scroll down to view this section of the screen:
Share Name. If only 1 device is connected, the default share name is USB_Storage. You
•
can click the name shown, or you can type it in the address field of your web Browser. If
Not Shared is shown, the default share has been deleted, and no other share for the root
folder exists. Click the link to change this setting.
Read/Write Access. Shows the permissions and access controls on the network folder:
•
All - no password (the default) allows all users to access the network folder. The
password for admin is the same one that you use to log in to the router.
Folder Name. Full path of the network folder.
•
Volume Name. Volume name from the storage device (either USB drive or HDD).
•
Total/Free Space. Shows the current utilization of the storage device.
•

Safely Remove a USB Drive

To remove a USB disk drive safely, select USB Storage > Basic Settings, and click the
Safely Remove USB Device button. This takes the drive offline.
R6300 WiFi Router 802.11ac Dual Band Gigabit
USB Storage
51