Cisco TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V X6 Command Reference Manual page 32

xConfiguration command reference
SNMP Mode: <On/Off>
Enables or disables SNMP support.
Default: Off
Example: xConfiguration SNMP Mode: On
SNMP SystemContact: <S: 0, 70>
Specifies the name of the person who can be contacted regarding issues with the VCS.
Example: xConfiguration SNMP SystemContact: "John Smith"
SNMP SystemLocation: <S: 0, 70>
Specifies the physical location of the VCS.
Example: xConfiguration SNMP SystemLocation: "Server Room 128"
SNMP V1 Mode: <On/Off>
Enables or disables SNMP Version 1 support.
Default: On
Example: xConfiguration SNMP V1 Mode: On
SNMP V2c Mode: <On/Off>
Enables or disables SNMP Version 2c support.
Default: On
Example: xConfiguration SNMP V2c Mode: On
SNMP V3 Authentication Mode: <On/Off>
Enables or disables SNMP Version 3 authentication.
Default: On
Example: xConfiguration SNMP V3 Authentication Mode: On
SNMP V3 Authentication Password: <S: 0,215>
Sets SNMP Version 3 authentication password. Note: must be at least 8 characters.
Example: xConfiguration SNMP V3 Authentication Password: "password123"
SNMP V3 Authentication Type: <MD5/SHA>
Sets SNMP Version 3 authentication type.
Example: xConfiguration SNMP V3 Authentication Type: SHA
SNMP V3 Mode: <On/Off>
Enables or disables SNMP Version 3 support.
Default: On
Example: xConfiguration SNMP V3 Mode: On
SNMP V3 Privacy Mode: <On/Off>
Enables or disables SNMP Version 3 privacy.
Default: On
Example: xConfiguration SNMP V3 Privacy Mode: On
Cisco VCS Command Reference (X6) Page 32 of 95