Table of Contents
Advertisement
xConfiguration command reference
SIP Routes Route [1..20] Header Pattern: <S:0,128>
Regular expression to match against the specified SIP header field.
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Header Pattern: "(my-event-package)(.*)"
SIP Routes Route [1..20] Method: <S:0,64>
SIP method to match to select this route (e.g. INVITE, SUBSCRIBE).
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Method: "SUBSCRIBE"
SIP Routes Route [1..20] Port: <1..65534>
Specifies the port on the next hop for this route to which matching SIP requests will be routed.
Default: 5060
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Port: 22400
SIP Routes Route [1..20] Request Line Pattern: <S:0,128>
Regular expression to match against the SIP request line.
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Request Line Pattern:
".*@(%localdomains%|%ip%)"
SIP Routes Route [1..20] Tag: <S:0,64>
Tag value specified by external applications to identify routes that they create.
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Tag: "Tag1"
SIP Routes Route [1..20] Transport: <UDP/TCP/TLS>
Determines which transport type will be used for SIP messages forwarded along this route.
Default: TCP
Note: this command is intended for developer use only.
Example: xConfiguration SIP Routes Route 1 Transport: TCP
SIP Session Refresh Minimum: <90..7200>
The minimum value the VCS will negotiate for the session refresh interval for SIP calls. For further
information refer to the definition of Min-SE header in RFC 4028.
Default: 500
Example: xConfiguration SIP Session Refresh Minimum: 500
SIP Session Refresh Value: <90..7200>
The maximum time allowed between session refresh requests for SIP calls. For further information refer to
the definition of Session-Expires in RFC 4028.
Default: 1800
Example: xConfiguration SIP Session Refresh Value: 1800
Cisco VCS Command Reference (X6)
Page 30 of 95
Advertisement
Table of Contents
